Standard Performance

The following tables show flowrates and required driving motor power for each pump rpm at a fixed discharge pressure.

  • The driving motor power is determined by reflecting field experiences, such as the minimum motor power and some allowances to the calculated shaft driving power. For practical selection of the driver, the values on the tables are applied instead of the calculated shaft driving power.
  • The driving motor power is much larger than the theoretically calculated shaft driving power because the mono pump needs large starting torque despite of the high efficiency of the pump.
  • For large speed reduction/variation ratio, some adjustments shall be considered according to torque characteristic of driving motor.
  • In case of speed variations by the inverter, one-level higher than driving motor power is recommended
  • Performance table for low pressure
  • Performance table for medium and high pressure

1 Performance table for low pressure

For discharge pressure of 2kg/cm²

Rotation 100rpm 200rpm 300rpm 400rpm 500rpm 600rpm 700rpm
Model Connection
(A)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)
K15 20 0.05 0.2 0.13 0.2 0.20 0.2 0.27 0.2 0.35 0.2 0.42 0.2 0.49 0.2
K20 32 0.16 0.2 0.32 0.2 0.48 0.2 0.64 0.2 0.80 0.4 0.97 0.4 1.13 0.4
K30 50 0.58 0.2 1.15 0.4 1.73 0.75 2.30 0.75 2.88 0.75 3.46 1.5 4.03 1.5
K40 65 1.39 0.4 2.78 0.75 4.17 1.5 5.56 1.5 6.95 1.5 8.34 2.2 9.73 2.2
K50 80 2.56 0.75 5.12 1.5 7.69 2.2 10.20 2.2 12.80 3.7 15.40 3.7 17.90 3.7
K60 100 4.65 1.5 9.30 2.2 13.90 3.7 18.60 3.7 23.20 5.5 27.90 5.5
K69 100 7.79 1.5 15.60 3.7 23.40 3.7 31.20 5.5 39.00 7.5 46.70 7.5
K80 125 11.20 2.2 22.50 5.5 33.70 7.5 45.00 11 56.20 11
K89 125 14.00 3.7 28.12 7.5 42.12 11 56.25 11 70.25 15        
K100 150 22.00 5.5 44.00 7.5 66.00 11 88.00 15 110.00 18.5        
K120 200 37.60 7.5 75.20 15 113.00 18.5 150.00 30            
K150 250 73.90 15 148.00 30 222.00 37                

For discharge pressure of 2kg/cm² low concentration/low viscosity type

Rotation 100rpm 200rpm 300rpm 400rpm 500rpm 600rpm 700rpm
Model Connection
(A)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)
K22 32 0.32 0.2 0.64 0.2 0.96 0.4 1.28 0.4 1.60 0.75 1.94 0.75 2.26 0.75
K32 50 1.16 0.4 2.30 0.75 3.46 1.5 4.60 1.5 5.76 1.5 6.92 1.5 8.06 1.5
K42 65 2.78 0.75 5.56 1.5 8.34 2.2 11.12 2.2 13.90 3.7 16.68 3.7    
K52 80 5.12 1.5 10.24 2.2 15.38 3.7 20.40 3.7 25.60 5.5        
K62 100 9.30 2.2 18.60 3.7 27.80 5.5 37.20 5.5 46.40 7.5        
K82 125 22.40 5.5 45.00 7.5 67.40 11 90.00 15            
K102 150 44.00 7.5 88.00 15 132.00 22                
K122 200 75.20 15 150.40 22 226.00 37                
K152 250 147.80 30 296.00 45 444.00 55                

For discharge pressure of 4kg/cm²

Rotation 100rpm 200rpm 300rpm 400rpm 500rpm 600rpm 700rpm
Model Connection
(A)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)
K15 20 ◎ ◎ ◎ ◎ 0.07 0.2 0.14 0.2 0.22 0.2 0.29 0.2 0.36 0.2
K20 32 ◎ ◎ 0.07 0.2 0.23 0.2 0.39 0.4 0.55 0.4 0.71 0.4 0.87 0.4
K30 50 ◎ ◎ 0.58 0.4 1.16 0.75 1.74 0.75 2.31 0.75 2.89 1.5 3.46 1.5
K40 65 0.38 0.75 1.77 0.75 3.16 1.5 4.55 1.5 5.94 2.2 7.33 2.2 8.72 3.7
K50 80 1.01 1.5 3.57 1.5 6.13 2.2 8.69 3.7 11.30 3.7 13.80 3.7 16.40 5.5
K60 100 2.37 1.5 7.02 2.2 11.70 3.7 16.30 5.5 21.00 5.5 25.60 7.5    
K69 100 5.52 2.2 13.30 3.7 21.10 5.5 28.90 7.5 36.70 11 44.50 11    
K80 125 7.19 3.7 18.40 5.5 29.70 11 40.90 11 52.10 15        
K89 125 8.98 5.5 23.00 7.5 37.12 15 51.12 15 65.12 18.5        
K100 150 15.70 5.5 37.70 11 59.70 15 81.70 22 104.00 30        
K120 200 28.50 11 66.10 18.5 104.00 30 141.00 37            
K150 250 59.70 18.5 134.00 37 207.00 55                
  • If you wish to operate the pump in the ◎ range, please contact us for various constraints.

MONAS High pressure pump

  • For applications that require high discharge pressure, a multi-stage mono pump with two or more stages is used.
  • High-pressure MONAS is mainly used for forced press-in of various high-viscosity liquids and it is possible to manufacture up to 8-stage mono pumps that can produce ultra-high pressure of up to 48 bar.
  • In addition to increasing the number of stages of rotor and stator, the high-pressure MONAS is designed and manufactured with sufficient margin to transmit a corresponding strong power.

2Performance table for medium and high pressure

For discharge pressure of 8kg/cm²

Rotation 100rpm 200rpm 300rpm 400rpm 500rpm 600rpm 700rpm
Model Connection
(A)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)
2K15 20 ◎ ◎ ◎ ◎ 0.07 0.2 0.14 0.4 0.22 0.4 0.29 0.4 0.36 0.4
2K20 32 ◎ ◎ 0.07 0.4 0.23 0.4 0.39 0.4 0.55 0.75 0.71 0.75 0.87 0.75
2K30 50 ◎ ◎ 0.58 0.75 1.16 1.5 1.74 1.5 2.31 1.5 2.89 1.5 3.46 2.2
2K40 65 0.38 0.75 1.77 1.5 3.16 2.2 4.55 3.7 5.94 3.7 7.33 3.7 8.72 5.5
2K50 80 1.01 1.5 3.57 3.7 6.13 3.7 8.69 5.5 11.30 5.5 13.80 5.5 16.40 11
2K60 100 2.37 2.2 7.02 5.5 11.70 7.5 16.30 11 21.00 11 25.60 11    
2K80 125 7.19 5.5 18.40 11 29.70 15 40.90 22 52.10 30        
2K100 150 15.70 11 37.70 22 59.70 30 81.70 37 104.00 45        
2K120 200 30.40 18.5 69.90 37 109.00 55 149.00 75            
2K150 250 63.40 37 141.00 75 219.00 110                

For discharge pressure of 16kg/cm²

Rotation 100rpm 200rpm 300rpm 400rpm 500rpm 600rpm 700rpm
Model Connection
(A)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)
4K15 20 ◎ ◎ ◎ ◎ 0.07 0.4 0.14 0.4 0.22 0.4 0.29 0.75 0.36 0.75
4K20 32 ◎ ◎ 0.07 0.75 0.23 0.75 0.39 0.75 0.55 1.5 0.71 1.5 0.87 1.5
4K30 50 0.01 0.75 0.58 1.5 1.16 2.2 1.74 2.2 2.31 3.7 2.89 3.7 3.46 3.7
4K40 65 0.38 1.5 1.77 3.7 3.16 3.7 4.55 5.5 5.94 7.5 7.33 7.5 8.72 11
4K50 80 1.01 3.7 3.57 5.5 6.13 7.5 8.69 11 11.30 11 13.80 15 16.40 15
4K60 100 2.37 5.5 7.02 11 11.70 15 16.30 18.5 21.00 22 25.60 30    
4K80 125 7.19 11 18.40 22 29.70 30 40.90 37 52.10 55        
4K100 150 15.70 22 37.70 37 59.70 55 81.70 75 104.00 90        
4K120 200 28.50 37 66.10 75 104.00 90 141.00 132            

For discharge pressure of 32kg/cm²

Rotation 100rpm 200rpm 300rpm 400rpm 500rpm
Model Connection
(A)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)		 Flow Rate
(m³/hr)		 Power
(kW)
8K15 20 ◎ ◎ ◎ ◎ 0.07 0.75 0.14 0.75 0.22 1.5
8K20 32 ◎ ◎ 0.07 1.5 0.23 1.5 0.39 1.5 0.55 2.2
8K30 50 0.01 1.50 0.58 2.2 1.16 3.7 1.74 5.5 2.31 5.5
8K40 65 0.38 3.7 1.77 5.5 3.16 7.5 4.55 11 5.94 15.22
8K50 80 1.01 5.5 3.57 11 6.13 15 8.69 18.5 11.30  
8K60 100 2.37 11 7.02 18.5 11.70 30 16.30 37    
  • If you wish to operate the pump in the ◎ range, please contact us for various constraints.